Methods Of Mobile Phone And Ipad To Control LED Display
Mobile phone and ipad combined scheme to control LED display.
In order to respond to the development of the times, mobile phones and iPads now have more and more computer functions, that is, online work can be realized on mobile phones and iPads. Since mobile phones and iPads can implement most of the computer’s functions, it is no problem to use mobile phones and iPads to control the LED display. So how do they control the LED display and what is the principle?
In fact, one of the most important reasons for mobile phones and iPads to control the LED display is to connect these devices. Do mobile phones and iPads need a network cable like a computer to connect? The answer is no, just use WIFI to connect.
Several Methods of Mobile Phone and iPad to Control LED Display
WIFI wireless control
The system uses a mobile terminal (mobile phone, IPAD) as the control terminal, and realizes remote wireless screen control for the first time. All its functions can be realized by touch screen control. Zero-second switching is not blocked. Really abandon the traditional keyboard, mouse, software instead of hardware.
Working principle: By installing a wireless router or other wireless equipment, bridge the user’s original wireless network, build a wireless local area network, and easily integrate the network control card into the wireless network for wireless network control for Novastar TB3.
Features: No wiring, convenient installation and debugging, fast data transmission speed.
Required equipment: network bridge, wireless router (applied on the display is a device that selects a replaceable antenna, so that it can effectively receive wireless signals).
Disadvantages: The communication distance mainly depends on the gain capability of the network bridge. The communication distance of the wireless router is relatively short, and the signal of the partition wall is weak or no signal. It is suitable for places with short distance wireless signals. If there is wireless signal coverage in your display area, it is even simpler. You only need to bridge the wireless router connected to the LED display control card in the Linsn to your wireless network, and you can access the internal network. Control the display on any computer.
RF wireless control
Working principle: One end of the RF module is connected to the control computer and the other end is connected to the control card serial port. After the driver is installed on the computer, a virtual serial port is generated and data is sent through this serial port.
GPRS wireless control
Working principle: After the GPRS module is powered on, it completes the process of dialing up to the Internet and connects to the data center server. The client accesses the server through the client software, and the server forwards the information.
4G full Netcom wireless control
Working principle: Basically the same as 3G / GPRS.
Features: 4G full Netcom (supported by China Mobile, China Unicom and China Telecom), fast transmission rate, fully real-time control, and sending commands can instantly respond to related controls.
Several functions of mobile phone and ipad to control led display
Graphical preview and visual operation
Use IPAD to control the screen, any function is imaged, at a glance, you can play mobile phones, iPad, you will control the LED screen! Before switching, you can preview the content to be played, to prevent misoperation to the greatest extent, safe and reliable!
2.2. One-button adjustment of brightness and volume According to the actual situation on the spot, customers can remotely control the brightness of the screen body (from * bright to black screen) and volume at any time on the iPad, which is simple and convenient. It is important that any operation will not affect the use of the current screen body, without having to exit the current playback!
support list editing
Before or during use, customers can categorize the play programs, sort the list, increase or decrease files, and pre-monitor at any time. You can set a single loop or a list loop when playing a video.
Picture in picture, four pictures, nine pictures with one key switch
Single-picture playback mode and picture-in-picture (* supports four sub-pictures, which can be dragged and dropped in size), four-picture and nine-pictures, which can be switched with one button, zero-second delay without stalling; in multi-picture mode, double-click Arbitrary picture can switch between full screen and window (audio synchronization).
Support Office files playback such as PPT, Word, etc.
In addition to the above functions, the wireless screen control system also supports the normal playback of Office files (including PPT animations), seamless switching between Office files, and seamless switching with videos (that is, it can support large video files. Pause playback). A file can be placed in multiple windows, independent of each other, so as to preview the next screen and ensure security.
2.6. Can edit subtitles synchronously, support synchronous and asynchronous video recording. During use, users can edit letters synchronously, one-click can record video recording, support synchronous video recording and one video recording, and the recorded files can be exported.
Support multi-screen synchronization
This system can support one screen to control multiple screens. By switching, the playback content of each display can be controlled separately, and multiple screens can be controlled simultaneously.
Other functions
Power off and resume: Even if the iPad is turned off, the screen will still play according to the original mode without black screen playback;
External equipment: Supports direct connection of camera, DV, DVD player, notebook computer and other equipment signals, and can synchronize preview live broadcast pictures, which can be switched with one button.
Mobile phone and ipad combined scheme to control led display
(Use the main control box + WIFI) Combination solution The main control box can also be replaced with a Xiaomi box. The following main control box is used as an example:
Main functions
The mobile phone (Android, Apple) system is used to control the LED display to play the content in the mobile phone, which contains conventional pictures, videos and so on.
Required functional equipment:
- One Android / Apple system phone
- One master secret box
- One wireless router (Internet connection required)
- LED display set
- LED video processor-supports HDMI or related HDMI conversion cable (the main control secret box is the HDMI interface)
Before the control, the device needs to complete the connection and prepare the file for playback:
- First, connect the LED display screen and the LED video processor normally and complete the debugging.
- Connect the HDMI output of the main control box to the LED video processor and make the corresponding settings.
- The wireless router turns on the wireless network, and connects the mobile phone and the main control box to the same WIFI network at the same time.
- The mobile phone installs a corresponding version of the LED main control system according to the system, and connects to the main control secret box through the setting, and backs up the content to be played on the LED stage screen to the mobile phone in advance.
Specific operating methods:
- Through the main LED control system send the video or photo in the mobile phone or shared computer directly to the main control secret box through the upward stroke method. After receiving the main control secret box, your customized video and picture files will be played directly.
- Various videos in the Internet can also be played through the main control secret box.
